The Little-Known Benefits Of Ghost Immobiliser Problems

From BSI new
Jump to navigation Jump to search

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions from theft by using the Ghost Immobiliser. It is discreet and does not require additional key fobs.

The device makes use of the buttons in your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence of up to 20 presses. This will allow your vehicle to begin.

Simple PIN code Change Process

Many homeowners are upgrading their security because of the rising number of vehicle thefts. There are many different types of security gadgets that are sold aftermarket, from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. A tracking system can assist you in locating your vehicle in the event of it being stolen however, it won't stop the crime. An immobiliser, on the contrary does exactly what it says on the tin: it shuts down the engine of your vehicle to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your vehicle.

The ghost device uses the buttons on your car to create an unique sequence that needs to be entered to allow the engine to begin. This can be done by using the window, heater or indicator stalk buttons. In addition to this, there is also a mobile app which acts as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This is especially useful when you need to surrender your car for valet parking or servicing because the immobiliser is activated, but not disabled.

The Ghost is an unique and innovative device that operates with the buttons of your vehicle instead of as a separate unit. It's not just an effective deterrent to theft of your vehicle, but it can be used on future vehicles you may own. This makes it a better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security system that protects your car from key hacking and cloning. It also stops ECU swapping. It is a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be placed in the vehicle without the need for additional wiring and has been thoroughly tested to make sure it is compatible with all vehicles. It also is resistant to jamming devices which is an approach used frequently by thieves to bypass existing immobilisers.

The advantage of using CAN data is that it operates in a silent manner when compared to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators but instead utilizes buttons on your vehicle, like the steering wheel, the centre console, or door panels, to create a unique sequences for disarming. You can create a sequence that is as long as 20 presses to increase security. The iPhone app is limited to one connection, using the Ghost's unique pairing code. the Ghost. All communication between the two devices is protected.

The Ghost also stops thieves from stealing an additional key or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to start only if the correct pin code is entered. It is also possible to put it into valet/service mode for boris.icu a temporary operation (with set parameters such as 30mph speed limit) so that you can hand your car over to a valet service or to be serviced without needing to enter a PIN code.

Each vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device is able to intercept signals and stop your car from starting up normally until you enter a customized code. The system can be turned on and off through your smartphone's application without the need for additional wires.

The standard factory immobilisers function by using a transponder, which is integrated into the key. This transmits a signal to the ECU. The car will start if the correct code is sent. However, if the transponder of a different vehicle is used instead, the immobiliser doesn't recognize it. This makes it possible for the vehicle to start and be stolen. The Ghost immobiliser was created by an South African company at the forefront of vehicle security systems technology. It protects your vehicle from hacking, key cloning and even key theft. The only way a thief could steal your vehicle is physically towing it away and even then, they would not be able to drive it.

Ghost makes use of buttons in your vehicle, like the indicator stalk, the steering wheel, as well as the door panels, to generate unique PIN codes that needs to be entered in order to use your car. It does this without extra hardware, such as a keyfob. It can take up 20 to 20 presses. It is also unrecognizable to diagnostics equipment and doesn't transmit radio frequency signals so thieves cannot use sophisticated RF scanning or code-grabbing technology to detect that a security system has been installed.

Ghost is harder to remove than car alarms that require disarming with several buttons. This makes it a perfect alternative to a GPS tracker, which can help locate your car after it's been stolen.

Emergency PIN code override

You do not have to look far on social media sites to find stories or even videos of vehicles that have been stolen by car thieves employing the latest technology tools available to them. This includes key-cloning devices and reserv.xn--oy2b23yvwhete.com hacking tools that allow them to start the vehicle with your original keys.

Our Ghost immobiliser fights this and 52.78.148.134 gives you an additional layer of security to stop your vehicle from being taken if it is targeted by thieves. It generates a unique pin code when pressing the buttons on your steering wheel, door panel, and the centre console. The unique pin code is entered alongside the original key fob to prevent the engine from beginning. The unique override pin is found on a black plastic card that you will receive after the installation. It is simple to remember because there are no LED indicators.

The device is hidden in the vehicle's wires, and does not emit radio signals, therefore it cannot be recognized by thieves using diagnostic software that is able to identify the security system you have installed. This makes it an excellent alternative to the tracking device.

In contrast to other security systems that have a relay in the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependant). This enables them to shut down the vehicle completely with an electronic block of commands that is sent to both the ECU and the engine.

They can also be linked to a separate analogue alarm, immobiliser or tracker. This must be specified prior to the installation. They are also compatible with valet/service modes and is a great alternative to a tracking device if you take your car into the dealer for an electrical problem.

Service/Valet mode

In recent years there has been a increase in vehicles stolen without the owner's keys. It's now more easy than ever to take your joy and pride with the availability of key cloning tools and door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, even if you keys have been copied.

It communicates directly to your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it does not use radio frequencies or key fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also prevents you from introducing a new ECU or key to bypass the system as only the PIN code allows the engine to be started.

The device is hidden within your car using existing buttons on the steering wheel, centre console and door panels. Before you can start your car, you need to enter a unique and changeable PIN number that is up to 20 numbers.

This is the first aftermarket CAN-bus immobiliser that has been designed. It will stop your vehicle from being started or driven when you don't enter a PIN number first. If you are driving away with the device in motion the indicator will flash on your dashboard and flash continuously for about 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate normally. If you don't enter your PIN code at this time the indication will continue to flash and will require a new PIN code for every attempt to start your car.