10 Healthy Habits For Ghost Immobiliser Problems
Protect Your Pride And Joy With The Ghost Immobiliser
Protect your pride & joy against theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs to operate.
The device makes use of the buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence that can be up to 20 presses long. This will then authorize the vehicle to start.
Simple PIN code Change Process
Many owners are upgrading their security because of the rising number of vehicle thefts. There are many different types of aftermarket security devices including tracking systems, alarms and immobilisers. However there are a few that are equally effective in protecting your car. A tracking system may assist you in locating your vehicle in the event of it being stolen however, it won't prevent the crime. Immobilisers, however, do exactly what they state on the tin - they disable your car's motor so that it isn't able to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it almost impossible for thieves to steal your vehicle.
Using the existing buttons in your car, the ghost device creates an unique sequence that must be entered before the car's engine starts. This can be accomplished by using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This option is particularly beneficial if you have to give your car away for valet parking or maintenance since the immobiliser will still be active and not deactivated.
The Ghost is an innovative and unique device that works by using the buttons on your vehicle rather than as a standalone unit. This means it's not just a highly effective security measure against theft from your vehicle but can also be transferred onto any other vehicles you own, making it more valuable than traditional steering wheel locks.
Weatherproof tiny device
The Autowatch ghost car immobiliser Immobiliser is a high-tech security device that shields your car from key cloning and hacking. It also stops ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU over the CAN data bus to disable the engine. It can be placed in the vehicle without the need for extra wiring and has been thoroughly tested to make sure it works with all vehicles. It is also resistant against jamming devices which are a typical method used by car thieves to get around immobilisers.
The advantage of using CAN data is that it runs silently when compared to conventional systems. It isn't detected by sophisticated RF scanning and code-grabbing technology and cannot be recognized by conventional diagnostic tools. The Autowatch ghost immobiliser fitting doesn't use LED indicators and instead uses buttons on your vehicle, like the steering wheel, the centre console, or door panels, to create a an unique sequence of disarming. You can make this sequence up to 20 presses long to increase security. The iPhone app allows only one connection, using the Ghost's unique pairing code. the Ghost. All communication between the two devices is secured.
The Ghost prevents car thieves adding a new ignition key or replacing the ECU in order to bypass the immobiliser. The engine will only start if a valid PIN code has been entered. It is also possible to put it in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) to allow you to give your car to a valet service or for maintenance without having to enter a PIN.
Each vehicle is tested
The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that connects to the wiring of your vehicle and connects to your engine control unit (ECU). The device intercepts signals to stop your car from operating normally until you enter a specific code. The system can be turned on or off via your smartphone's app, without the need for extra wires.
The standard factory immobilisers work by using a transponder, which is integrated into the key. It transmits a message to the ECU. If the correct code is sent the car will start, but if a transponder is replaced with one from another vehicle the immobiliser cannot recognize it. This allows the vehicle to be stolen and started. A South African company that is at the forefront of safety systems technology developed the Ghost immobiliser. It shields your car from key cloning, hacking and even key theft. Only by physically towing your car away from thieves could they steal it and not be able drive it.
Ghost makes use of the buttons on your car, such as the indicator autowatch ghost immobiliser stalk, steering wheel and door panels to generate an individual PIN sequence that can be changed that needs to be entered before you can use your car. This is done without the need for extra hardware such as a key-fob and can be up to 20 presses long. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, Autowatch Ghost immobiliser meaning thieves cannot make use of sophisticated RF scanners or code-grabbing technologies to detect that an installation has been made.
Contrary to physical anti-theft devices such as clamps or wheel locks, Ghost is covertly integrated into the vehicle to ensure that it can't be taken away or disabled by thieves. It is also harder to remove than a car alarm, which requires disarming via a button sequence. This makes it a fantastic addition to an GPS tracking device which can be used to locate your vehicle after it's been stolen.
Emergency PIN code override
You do not have to look long on social media sites to find stories or videos of cars that were stolen using the most advanced technology tools. This includes key-cloning devices as well as hacking tools that allow them to start the car without your original keys.
Our ghost immobiliser review immobiliser combats this and provides you with an additional layer of protection to stop your vehicle from being taken if it is targeted by thieves. It works by creating a unique pin code sequence that is triggered by your existing buttons on the steering wheel, door panel, and the centre console. The unique pin code is entered along with your original key fob in order to prevent the engine from starting. The unique PIN for override is on the black card that you will receive after installation. It is simple to remember because there are no LED indications.
The device is hidden inside the vehicle's wiring and doesn't emit any radio signals, which means it cannot be identified by modern thieves with diagnostic software that can recognise what is a ghost immobiliser type of security system you have installed. This makes it an excellent alternative to an electronic device for tracking.
Unlike other security systems, which use a relay in engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to block the vehicle completely by sending a digital block to the ECU and engine.
They can also be linked to an analog alarm immobiliser or tracker. This should be specified prior to installation. They also work with service/valet modes and is a great alternative to a tracking device when you take your car to the dealer for an electrical issue.
Service/Valet Mode
In recent years there has been a rise in the number of vehicles being stolen with the owners' keys. It is easier than ever to steal your pride & joy with the availability of key cloning tools and door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It stops your vehicle from being driven even if you keys have been copied.
It connects directly to your car's ECU (Engine Control Unit) through the CAN data loop. It is completely silent as it does not use radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also stops the user from using the new ECU or key to bypass the system since only the PIN code allows the engine to be started.
The device is hidden inside your car by using buttons on the steering wheel, centre console and door panels. A unique and reversible PIN code sequence of up to 20 digits must be entered before you are able to start your vehicle.
This is the very first aftermarket CAN-bus immobiliser that is being designed. It will stop your vehicle from being started or driven if you don't enter a PIN number first. If the device is activated and you attempt to drive off it will display an indicator on your dash that will flash continuously for about 300m. If you type in your PIN code at this point it will disable the anti-hijack device and your car will continue to drive just as normal. If you do not enter your PIN at this time the indication will continue to flash and will require a new PIN code for every attempt to start your car.