Why We Enjoy Ghost Immobiliser 2 And You Should Also

Ghost Immobiliser 2

Protects your vehicle against key cloning and stops thieves from driving your vehicle with original keys. Our latest immobiliser connects to your vehicle's data network via CAN and the unique PIN code needs to be entered for the engine to begin.

Contrary to trackers Ghost doesn't transmit any radio frequency signals & can't be detected by diagnostic tools. It does not have any LED indicators or buttons that could signal its presence in your vehicle or van.

Anti-key cloning

The Ghost immobiliser was developed to combat key cloning. The device is connected to your vehicle's CAN data network and creates an unique pin code using the factory buttons in your dashboard and steering. This prevents the thief from being able to start your car. If the incorrect PIN code is entered, your engine will not be started and it will be impossible for them to escape with your pride and joy.

Ghost immobilisers use an innovative technology that is extremely difficult for thieves to defeat. The ghost immobiliser is different from physical deterrents such as wheel locks and steering lock that can be cut, is a discrete electronic device. It's not even detected by thieves because it doesn't emit radio signals and is operated in a silent manner.

The next generation of immobilisers are able to protect your car from a variety of threats, including cloned keys, key-hacking and even relay attacks. It can also stop the thief from adding a key or replacing your ECU since it will not allow them to start the vehicle without entering the correct PIN code.

Contrary to other immobilisers, the ghost immobiliser 2 doesn't require a remote or key fobs to operate. It is deactivable using an app on the smartphone of the driver. This is perfect for trackers when you have to hand your car away for valet parking, or maintenance without keys.

The autowatch ghost immobiliser Ghost-II is the latest evolution of our ground-breaking ghost immobiliser. It is designed to be as simple and user-friendly as possible, but remains as secure as ever. This is achieved by integrating the Ghost-II with the vehicle's CAN data network. This means that there aren't any wires that are able to be hidden or easily discovered. It has built-in features that allow you to deactivate the Ghost-II simply by connecting to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the latest method used by professional car thieves. Thieves can gain access to your vehicle's OBD using the help of a laptop, mobile app, and some cables that can be purchased on the internet for less than PS50. Once they have access, they will be able to do anything they like, from resetting your vehicle's fault codes to tuning your car, or stealing it within a matter of minutes.

It can protect your vehicle from being taken away by requiring a unique PIN code to be entered along with your key fob prior to you start the engine or drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. This is undetectable by any RF scanning technology or code grabbing. It also has a Service/Valet mode which allows your vehicle to be started without the need for a PIN.

To utilize an OBD hacking device, you'll need to have a laptop that has software capable of interpreting the OBD protocol, which is available for less than PS100 on eBay or Amazon. You will also require a cable with OBD pins that are connected to the CAN Bus. These cables can be purchased on eBay or Amazon for PS50. You then need to splice the cable into the wire harness of your vehicle for example, the radio wiring harness.

Once the hacker has access to the OBD port of your vehicle, they are able to send diagnostics to the system using high baud rate, which will crash the car's CAN and stop the system from functioning. This can cause your car's engine to stall or trackers lock up.

There is no need for additional remotes or key fobs

The car immobiliser is a fantastic piece of anti-theft technology utilized by millions of modern cars across the globe. An aftermarket immobiliser safeguards your vehicle with engine ECU software that prevents cars from starting if an untrue transponder signal is sent.

However, it is easy for a thief to get around an immobiliser system in the event that they have access the code to deactivate it. The battery inside most key fobs can be easily removed by removing it and a burglar can employ a simple tool take out the immobiliser's circuit board and replace it with the blank. They will then be able start your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no remotes or keys to be purchased. The immobiliser communicates with vehicle's engine ECU (Engine Control Unit) via a subtle quiet CAN data circuit that is undetectable with diagnostic tools such as those employed by high-tech thieves. It also doesn't make use of a traditional key-fob that has LED indicators, which means it is able to go unnoticed at a glance.

There will be occasions that you must deactivate autowatch ghost immobiliser Ghost 2's auto-protection for instance, during an valet parking or a service work. The ghost car immobiliser CAN immobiliser has a dedicated mode for this, referred to as "Service Mode which is activated by a push of an app on your smartphone. The vehicle can still be operated, but its maximum speed will be limited to 36mph for added security.

If you'd like to learn more about the TASSA accredited ghost immobiliser, contact us now to schedule a demonstration at our workshop. A member of our team will explain how the system works and will give you a Ghost 2 emergency card, installation certificate, and security guarantee.

Simple Change of PIN Code

Ghost is the latest generation of device that protects your vehicle without cutting wires or installing key fobs from an aftermarket. It connects directly to your vehicle's CAN data network and a personal PIN code is programmed into it via buttons on your steering wheel & dash. The device doesn't emit RF signals, which means it is unable to be manipulated. This makes it unrecognisable by sophisticated scanning or code grabbing technology that modern thieves employ.

The PIN code can be changed to block previous drivers or even include an override code in case you forget the sequence. The installer will show you the procedure to accomplish this during installation. The system also has the option of a valet mode that can be used to temporarily disable the pin input sequence to allow your garage or mechanic can repair the car without having to know the pin code. This is a great choice for customers who don't want their PIN sequence to be revealed but still want to leave their car with valet parking or service.

Ghost is a discrete system that uses the buttons on your vehicle to create an individual and interchangeable PIN sequence. The sequence is entered using the app on your smartphone. No additional LED indicators are used, and your car will be protected without any possibility of being disabled.

Tested for each vehicle

Ghost immobilisers, unlike key fobs which require pressing buttons, is hidden under the steering wheel or dash. You won't even know it's there. The device is connected to your car's CAN data networks and an individual PIN code is programmed into it using buttons that are already present on your car. The system will then stop your engine from starting unless the code has been entered first. This means that thieves cannot duplicate your keys or gain access to the OBD port to hack into your vehicle.

Ghost can be installed in all vehicles, including electric cars, vans motorhomes and bicycles. It's also incredibly versatile and can be programmed to shut down in various scenarios. For instance, it can be set to enter Valet mode when the car is taken to a valet parking or a service provider. This means that your car can be operated within a pre-determined 30mph speed limit. The ghost immobiliser will activate itself when it returns to your home.

Another excellent feature is that the device can be reset to the personalized PIN code at any time. This is great if you lose the code, or when the device ceases to function.

The device is also completely unnoticed by anyone who doesn't even know what it is. This is because it runs through existing buttons on the dashboard of your car and on the steering wheel, and uses the data they send to identify which button has been hit. This makes it a secure and secure security system that can't be manipulated by RF scanning, jamming, or door lock pick set.