Ghost Immobiliser 2 Explained In Fewer Than 140 Characters
Ghost Immobiliser 2
Secures your vehicle from key cloning & stopping thieves driving it using the original keys. Our most recent immobiliser is connected to the CAN data network in your vehicle and a unique pin must be entered to begin the engine.
Ghost unlike trackers, does not emit radio frequency signals and can't be detected by diagnostic tools. There are also no indicators in the form of LEDs or buttons that give away its presence within your van or car.
Anti-key Cloning
The ghost immobiliser is designed to stop key cloning and hacking. The device connects to the CAN data network in your vehicle and creates a unique pin code sequence that is activated by pressing the factory buttons on your dashboard and the steering wheel. This prevents the thief being able to start your vehicle. If the incorrect PIN is entered it will prevent your engine from starting which makes it impossible to drive off with your pride and Joy.
A ghost immobiliser is a new technology that is extremely difficult for thieves to beat. The ghost immobiliser is different from physical deterrents like wheel locks and steering locks that are able to be cut, is a discreet electronic device. It isn't detected by thieves because it does not emit radio signals and operates silently.
The next generation of immobilisers are capable of protecting your vehicle from a range of threats like cloned keys, key-hacking and even relay attacks. It also has the ability to prevent thieves from adding an additional key or replacing your ECU, as it will not allow them to start your car without entering the correct PIN code before entering.
The ghost immobiliser 2, unlike other immobilisers, does not require an external remote or key fob to operate. It can be turned off by the driver's smartphone by using a simple app. This is ideal for those times when you have to hand your car over for valet parking or servicing without key fobs.
The autowatch ghost immobiliser fitting Ghost-II represents the latest version of the Ghost immobiliser. It was designed to be as simple and easy to use as is possible, yet remains as secure as ever. This is accomplished by connecting the Ghost-II with the vehicle's CAN data network. This means that there aren't any wires that are able to be hidden or easily spotted. It also comes with built-in features that allow you to disarm the Ghost-II simply by connecting to your vehicle's Bluetooth.
OBD port hacking
OBD port hacking is the newest method being used by professional car thieves to steal cars. Thieves can access your vehicle's OBD port with nothing more than a laptop, an application and a few cables that can be bought online for under PS50. Once they have access to your vehicle's OBD port, they can do whatever they like, from resetting fault codes and tuning your vehicle to stealing your pride and joy in under a minute.
It can prevent your car from being taken away by requiring a unique PIN code to be entered with your key fob before you can start the engine or leave. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. This is completely undetectable by any scanning technology, RF or code grabbing. It even has a Service/Valet mode which allows your vehicle to start without the need for a PIN.
To use an OBD hacking device you must have a laptop that has software capable of interpreting the OBD protocol, which can be purchased for under PS100 on ebay or Amazon. You'll also require cables with OBD pins that connect to the CAN bus. These are available on eBay and Amazon for about PS50. Then, you need to splice the cable into the wire harness of your vehicle for example, in the radio wiring harness.
Once the hacker has gained access to the OBD port on your vehicle, they can send diagnostics to the system at a high baud rate that will cause a crash of the car's CAN, and prevent the system from functioning. This can cause the engine to stop and doors to lock, or even the brakes to be engaged.
There is no need for additional remotes or ghost Immobiliser 2 key fobs
The car immobiliser is a great piece of anti-theft technology utilized by millions of modern vehicles all over the world. An aftermarket immobiliser protects your vehicle through the use of engine ECU software that blocks cars from starting if the transponder is false.
However, it is easy for thieves to bypass an immobiliser system if they have access to the code to deactivate it. The battery inside most key fobs is easily removed by prying it open, so a thief can make use of a simple tool to remove the immobiliser's internal circuit board and replace it with the blank. Then they will be in a position to start your vehicle.
With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser communicates with the vehicle's engine ECU (Engine Control Unit) through a discreet and silent data circuit in CAN that is undetectable with diagnostic tools, such as the ones used by high-tech thieves. It also doesn't use a traditional key-fob with LED indicators, meaning it can go undetected at sight.
There will be times that you must deactivate autowatch ghost immobiliser Ghost 2's auto-protection, for example during a valet parking or service job. ghost immobiliser for sale CAN immobilisers have a mode called 'Service Mode,' which is activated with the push of a phone button. The car is still operated however, its maximum speed will be restricted to 36 mph for added security.
If you'd like to know more about the TASSA accredited ghost immobiliser, call us today to arrange a demonstration at our workshop. A member of our team will explain the process, and give you your Ghost 2 emergency card, installation certificate, and security guarantee.
Simple change of PIN code
Ghost is the next-generation device that locks your vehicle without cutting wires or installing key fobs from an aftermarket. It connects directly to the vehicle's CAN data network. A personal PIN can be set by pressing buttons on the dash and steering wheel. The device does not emit RF signals, which means it is unable to be manipulated. This makes it inaccessible to sophisticated scans using RF or code-grabbing techniques that modern thieves employ.
The PIN code sequence can be changed anytime you want to lock out prior drivers, and it even has an override option in the event of a sequence that is not remembered. During installation, the installer will demonstrate how to do this. The system also comes with the valet mode feature that can be used to temporarily disable the pin input sequence so that your garage or mechanic can service the vehicle without needing to know the pin code. This is ideal for customers who want to hand over their car for valet parking or service but don't want to divulge the pin sequence.
In contrast to Thatcham products which require additional key fobs to operate, Ghost is a discreet system which takes advantage of the buttons inside your vehicle to create an unique and interchangeable PIN code sequence. This sequence is entered through the smartphone application. There are no additional LED indicators are thrown out, and your car will be protected without any risk of being disabled.
Tested for every vehicle
Ghost immobilisers, unlike key fobs which require pressing buttons, is hidden under the dash or on the steering wheel. Only you will know it's there. The device is connected to the vehicle's CAN data network, and the personalised PIN code is inserted using buttons that are already present on your car. The system won't permit your car to start until this code is entered. This means that thieves cannot duplicate your keys or access the OBD port to hack into your vehicle.
Ghost can be installed in any vehicle, including electric vehicles, motorhomes, vans and bicycles. It's also extremely flexible and can be programmed to turn off in various scenarios. It is possible to program it to enter Valet mode, for instance when the vehicle is transferred to a valet service or parking company. This allows you to drive within the 30mph limit and the ghost immobiliser near me immobiliser will turn on itself when your vehicle returns to your home.
The device can be reset at anytime to your personal PIN number. This is helpful when you forget the code or the device is inoperable which means it's as good as new again.
It's also worth noting that the device is completely inaccessible to those who aren't familiar with it. This is because it runs through the buttons that are already on your car's dashboard and steering wheel and uses the data they send to recognise the buttons that have been pressed. This makes it a secure and reliable security system that cannot be altered through RF scanning or jamming, or a door lock pick set.