10 Things Everyone Makes Up About Saab 9-3 Key Replacement
How to Replace the Replacement Key Battery For the saab key programming (Read the Full Post) 9-3
Saab owners have a distinct procedure to add another key. It requires dealer service using a handheld computer called Tech-2. Then, a new transponder and Saab key programming key must be purchased.
Rotate your keys to stop one from wearing out more than the next. This will also help keep your keys in top condition.
Replacement Case
Unlike the classic Saab keys of old keys, the latest key fobs contain electronics which makes it more difficult to make a copy. This has made theft of cars much more complicated than it was 20 years ago. It also makes it more expensive to replace lost keys.
Saab 9-3 owners should have two keys working. It is costly to replace a lost or damaged key since it requires replacing the CIM module, as well as reprogramming the locking cylinders. Dealers charge between $100-$200 to do this.
There are a few ways to avoid the high price. Some parts providers will find the code from an old key (usually the same one that opens the doors and turns on the ignition) and cut a brand new metal key blade at less than the dealer's cost. The key must be exactly the same as the original for it to work in your vehicle.
You can also change the case yourself by following these steps. You will need an flathead screwdriver and patience. With the screwdriver, you can pry apart the plastic and remove the emergency key. When the case is opened remove all electronics and place them in your new case. Make sure you put the correct badge and key back into the case, as well.
replacement key for saab 93 Battery
The Saab 9-3 replacement battery is a cheap component that can be easily and quickly replaced. This YouTube video from Cyclone Cyd shows how to replace the battery for the remote fob in just four steps. This tutorial can be used for any modern saab key fob however the procedure might differ slightly.
This button is usually located near the Saab logo on the back of the fob. This button is usually located on the back of your fob next to the Saab Logo. Then you will need the flathead screwdriver to insert into the small hole in this button. This will allow you to open the case of the fob so that you can replace the battery.
Once you have installed the CR1632 batteries, you can put back together the remote key fob. You can then program it into your car. The entire process should not take more than an hour at most. It's a simple process that does not require any special equipment.
If you lose a key the process will be somewhat more complex however it can be done. The dealer has to determine the VIN of the car and then order a replacement key blade and a TWICE module with the correct unique code. The dealer will then need to program the key using MDI, a new software tool.
Replacement Key Fob
The key fob is the part that locks and unlocks your car. It has a battery within. Batteries have a finite lifespan and eventually die. It is a common problem for all vehicles. The good thing is that you can change the batteries in most key fobs, without having to replace the entire case. Amazon sells replacement fobs that have all the electronics installed. You can simply open the case and replace the batteries. It's important to note that you will need to take out the emergency key first, and you can accomplish this by inserting a small flathead screwdriver into the slot located in the middle of the case. The case should split when you work the screwdriver all around it.
When you're ready to replace your keys, make sure you have a spare because this can cut down the total cost by a significant amount. If you do have a spare, you can have the dealer cut the new key and program it to your car, which is cheaper than replacing the entire key fob.
If you do not have a spare key car key, you can add a second key to your car, but this will require a lot of research and effort. A second key can cost a few hundred dollars, and it requires programming of the car's computer. Professionals can accomplish this however, it's a costly option.
Replacement Ignition
In contrast to the earlier Saab cars, the modern SAAB 9-3 models have an advanced alarm system that is based on a coded key. This means that if you lose your only working key, adding another one can be very expensive as the car has to have a specific computer module added and it also must be specially programmed to accept a new key. Even a dealer can charge hundreds of dollars to program a new key in the event that they are unable to do it.
If you've lost your sole working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) to make an exchange, and they will charge you a premium price for it. We can reprogramme the existing EEPROM inside your car's computer so that it is ready for an extra key. This will save you more than 50% off what you would pay a dealer.
If you've been a faithful owner of a 03-11 saab key replacement near me 9-3, you probably know that the ignition key isn't very robust. If your ignition key is not working properly, you should look into replacing it. They can become extremely sticky and the buttons are known to fall off. It's not as difficult as it appears to replace the ignition key. With the right tools, it can be accomplished quickly.