7 Simple Tricks To Rocking Your Ghost Immobiliser 2

From BSI new
Revision as of 06:18, 30 October 2023 by DollyLassiter1 (talk | contribs) (Created page with "Ghost Immobiliser 2<br><br>Guards your vehicle from key cloning, and stops thieves from driving your vehicle with original keys. Our latest immobiliser is connected to your vehicles CAN data network & a unique PIN code must be entered in order for the engine to start.<br><br>In contrast to trackers, Ghost does not transmit any radio frequency signals & can't be detected with diagnostic tools. Ghost doesn't have LED indicators or buttons that could indicate its pr...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Ghost Immobiliser 2

Guards your vehicle from key cloning, and stops thieves from driving your vehicle with original keys. Our latest immobiliser is connected to your vehicles CAN data network & a unique PIN code must be entered in order for the engine to start.

In contrast to trackers, Ghost does not transmit any radio frequency signals & can't be detected with diagnostic tools. Ghost doesn't have LED indicators or buttons that could indicate its presence in your vehicle or van.

Anti-key Cloning

The ghost immobiliser was created to fight key cloning and hacking. This device connects to the CAN data network of your vehicle and generates a unique pin code push sequence by using the buttons that are factory-installed on your dashboard as well as the steering wheel. This prevents thieves from being able to start your car. If the wrong PIN code is entered, your engine cannot be started and it will be impossible for them to escape with your joy and pride.

Ghost immobilisers employ new technology that is very difficult for thieves to beat. The ghost immobiliser unlike physical deterrents, such as wheel locks and steering lock that can be cut, is a discrete electronic device. It's not even recognized by thieves as it does not emit radio signals and operates silently.

The new generation of immobiliser is equipped to shield your car from a range of threats, including keys that are duplicated, key-hacking, and relay attacks. It can also stop thieves from stealing keys or replacing your ECU because it won't permit them to start the vehicle without entering the correct PIN code.

Contrary to other immobilisers, ghost immobiliser Birmingham the ghost immobiliser 2 doesn't require any additional remote or key fobs to operate. It can be turned off by using an app on the driver's smartphone. This makes it perfect for those occasions when you need to hand your car over to valet parking or for servicing without key fobs.

The Autowatch Ghost-II represents the latest evolution of Ghost's immobiliser. It was designed to be as easy and convenient to use as is possible, yet remains as secure as ever. This is accomplished by linking the ghost immobiliser near me-II into the vehicle's data network CAN, which means there are no additional wires to hide or easily located. It has an inbuilt feature that allows users to disable the Ghost-II simply by connecting to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the latest method being used by professional car thieves to steal vehicles. Thieves have access to your vehicle's OBD with an laptop, mobile app, and some cables that can be purchased on the internet for less than PS50. Once they have access to your vehicle's OBD port, they can do whatever they like including changing fault codes and tuning your vehicle to taking your joy and pride away in under a minute.

If you have a Ghost immobiliser installed, it will prevent your car from being stolen using this method, by requiring that a unique PIN sequence is entered into your key fob to start the engine and then drive away. It communicates with the vehicle's ECU (Engine Control Unit) by using the CAN Data Circuit. This is undetectable by any scanners for RF or code grabbing. It also has a Service/Valet mode which allows your vehicle to be started without the need for a PIN.

To use an OBD hacking device you need to have a laptop with software capable of interpreting the OBD protocol. These can be bought for less than PS100 on eBay or Amazon. You'll also require a cable with OBD pins connected to CAN Bus. These cables are available on Amazon/Ebay around PS50. The cable needs to be connected to the wiring harness of your car, such as the radio wiring harness.

Once the hacker has established a connection to your vehicles OBD port, they will send diagnostics to the system at high baud rates which can cause CAN to crash and stop systems inside your car from functioning. This could cause the engine to stall, doors to lock and even the brakes to activate.

No need to purchase additional remotes or key fobs

A car immobiliser is a great piece of anti theft technology that is used by millions of modern vehicles around the globe. An aftermarket immobiliser protects your vehicle by using engine ECU software that prevents vehicles from starting when the transponder is false.

However, it could be easy for thieves to bypass an immobiliser system in the event that they have access the code to deactivate it. A thief could easily remove the battery from many key fobs by removing them. They could then use a simple tool in order to take out the internal circuit board of an immobiliser and replace it with a blank. They'll then be able to start your vehicle.

With the TASSA approved ghost immobiliser for sale 2 immobiliser, there are no additional keys or remotes required. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is done via a discrete, quiet data loop in CAN that is not detected by diagnostic tools, ghost Immobiliser birmingham such as those used by high tech thieves. It does not also use a traditional key-fob with LED indicators, so it's not visible at sight.

You may have to turn off autowatch ghost immobiliser's Ghost 2 auto protection at certain times, such as during valet parking or during a service. Ghost CAN immobilisers feature a mode called "Service Mode,' which you can activate by a simple push of a button on your phone. The vehicle can still be operated, but the maximum speed is restricted to 36 mph for added security.

Contact us today to schedule an appointment for a demonstration in our workshop. A member of our team will explain the process and will give you a Ghost 2 emergency card, installation certificate, and security assurance.

Simple change of PIN code

Ghost is the next-generation device that protects your car without cutting wires or installing aftermarket key fobs. It is directly connected to the vehicle's CAN data network. A personal PIN can be set by pressing buttons on the dash and steering wheel. The system prevents engine start and cannot be bypassed because no RF signals are emitted from the device. This makes it inaccessible to sophisticated RF scanning or code grabbing technology that modern thieves employ.

The PIN code sequence can be altered whenever you want to lock out previous drivers and even includes an override code in the event of forgotten sequences. The installer will demonstrate the process to do this during installation. The system also comes with the option of a valet mode that can be used to temporarily disable the pin input sequence so that your garage or mechanic can repair the car without needing to know the pin code. This is a great option for those who don't want their pin number to be disclosed, but would like to leave their vehicle with valet parking or service.

Contrary to Thatcham products which require additional key fobs to operate, Ghost is a discreet system which takes advantage of the buttons in your vehicle to create a unique interchangeable PIN code sequence. The sequence is entered using the app on your smartphone. There are no additional LED indicators are thrown, and your vehicle is protected without possibility of being disabled.

Tested for every vehicle

Contrary to key fobs which require you to press buttons on them the ghost immobiliser is discreetly installed under the dash or steering wheel so that you don't even know it's even there. The device is connected to your car's CAN data networks and an individual PIN code is programmed using existing buttons on your car. The system won't permit your car to start until this code is entered. This means that thieves cannot clone your car's existing keys or gain access to the OBD port to gain access to your vehicle.

Ghost can be used in all vehicles including electric cars, vans, motorhomes and bikes. It's also extremely flexible and can be programmed to shut down in a variety of situations. For example, it can be set to enter Valet mode when the vehicle is being transported to a valet parking or service company. This means that your vehicle can be operated within a pre-determined 30mph speed limit, and the ghost immobiliser birmingham (recommended site) immobiliser will be activated when it is returned to your possession.

Another excellent feature is that the device can be reset to your personal PIN code at any point. This is great in the event that you lose the code or in the event that the device becomes unusable.

It's also important to note that the device is completely unnoticeable to anyone who isn't familiar with it. This is due to it running through the buttons on the dashboard of your car and on the steering wheel, and uses the data they send to recognise the button that was activated. This makes it a secure and reliable security system that cannot be compromised by jamming, RF scanning, or door lock pick sets.